800-772-7072

630-543-6700

NO-MAR BRAKE DIE FILM is our trade name for a line of high performance Urethane Film, available in various thicknesses and widths in 100 Ft. long rolls.

White Urethane Film

Hy-Per-Film Skived Film

NO-MAR BRAKE DIE FILM is our trade name for a line of high performance Urethane Film, available in various thicknesses and widths in 100 Ft. long rolls.

HI Performance Urethane film is made of a high performance cast Urethane compound, that is molded and skived into various thickness of film.

Standard Sizes:
Available in TAN or RED or BLUE colors

  • Thickness available are: 0.015" (0.4mm)0.022" (0.6mm) & 0.030" (0.8mm)
  • Widths: 4" (102mm), 6" (152mm)
  • Roll length : 100 Ft.(30 meters)
  • Custom sizes: Available in any thickness up to 1/16"(1.6mm) Any width up to 36" (914mm)
  • Any length: Up to 760Ft.(230 meters) 0.015"(0.4mm) thick. Up to 600Ft.  (180 meters)-0.022"(0.6mm) thick.
  • Up to 500 Ft. (150 meters)  0.03" (0.8mm) thick.
  • Guaranteed to out-perform any other brand name of film for bending Sheet metal on Press Brakes.

Positioning Devices Model-D

Positioning Devices Model-E

Accurate front to back positioning with a Screw design, with rotating height adjustment.

 

Order NOW!

Economical design features a mounting block with a slotted rail for front to back positioning, and a slotted bar for vertical positioning.

Order NOW!

31 West Industrial, Addison IL, U. S. A. 60101

©2016 Polyurethane Products, Corp.

800-772-7072

630-543-6700

31 West Industrial, Addison IL, USA 60101

©2016 Polyurethane Products, Corp.

Die-thane brand urethane press brakes dies were developed specificaly for sheet metal fabricating & tooling applications.

 

Die-Thane brand dies are a special breed of high performance thermo-set elastomers, compounded specifically for sheet metal forming applications, characterized by:

  • Extra toughness and durability
  • Excellent Resilience
  • Very High Load Bearing Capacity
  • High Tear Strength and Cut Resistance
  • Low Compression set
  • Very Good Impact Resistance
  • Outstanding Abrasion Resistance
  • Good Machinability
  • Impervious To Oil and Ozone

 

Die-Thanes - High Performance Elastomers

For demanding applications such as Press Brake tooling, Die Springs etc., specifying a compound by durometer is not appropriate. It should be based on the amount of deflection. For this reason, our compounds are designated by the maximum allowable deflection.

DIE-THANE CATALOG

PRESS BRAKE CATALOG

31 West Industrial, Addison IL, U. S. A. 60101

©2016 Polyurethane Products, Corp.