800-772-7072

630-543-6700

Our Poly-Thane Bumpers are made of a highly durable polyurethane that holds up to the toughest environments.

Threaded Round Bumpers

Our threaded bumpers have a tough, solid core surrounded by a rubber exterior that withstands impact. They are often used to guard, align, and position parts on automated machinery. Plus they're threaded so they're easy to install and remove. Male thread bumpers and male thread hex shoulder bumpers have a rigid stud made of steel for fastening into any surface.

Rectangular with Metal Plate

A 1/8" thick metal plate is bonded to the base of these bumpers for added reinforcement. They are often used to guard, align, and position parts. Bumpers have drilled unthreaded (through) holes to accommodate a mounting bolt (not included), unless noted. They're hard like a shoe heel. Bumpers with an aluminum base plate offer the best corrosion resistance.

Die-Set Bumpers

Manufactured using Die-Thane compounds to assure performance

  • Stock Lengths are 4" in Length
  • Longer Bumpers available in 1" increments
  • Stock Hardness is 90 Shore A (Red)
  • Other Hardnesses are available

31 West Industrial, Addison IL, U. S. A. 60101

©2017 Polyurethane Products, Corp.

800-772-7072

630-543-6700

31 West Industrial, Addison IL, U. S. A. 60101

©2017 Polyurethane Products, Corp.

Our Poly-Thane Bumpers are made of a highly durable polyurethane that holds up to the toughest environments.

Threaded Round Bumpers

Our threaded bumpers have a tough, solid core surrounded by a rubber exterior that withstands impact. They are often used to guard, align, and position parts on automated machinery. Plus they're threaded so they're easy to install and remove. Male thread bumpers and male thread hex shoulder bumpers have a rigid stud made of steel for fastening into any surface.

Rectangular with Metal Plate

A 1/8" thick metal plate is bonded to the base of these bumpers for added reinforcement. They are often used to guard, align, and position parts. Bumpers have drilled unthreaded (through) holes to accommodate a mounting bolt (not included), unless noted. They're hard like a shoe heel. Bumpers with an aluminum base plate offer the best corrosion resistance.

Die-Set Bumpers

Manufactured using Die-Thane compounds to assure performance

 

  • Stock Lengths are 4" in Length
  • Longer Bumpers available in 1" increments
  • Stock Hardness is 90 Shore A (Red)
  • Other Hardnesses are available

 

 

REQUEST
A QUOTE

31 West Industrial, Addison IL, U. S. A. 60101

©2017 Polyurethane Products, Corp.